I HAVE FOUND IT SOMEWHERE ELSE NOT DISCOVERED IT BUT DO NOT REMEMBER WHERE I HAD SEEN IT.... ALL CREDITS TO ORIGINAL UPLOADER
METHOD 1 " TO RECOVER THE CODE
THIS WILL WORK FOR ALL THE NOKIA BB5 HANDSETS like NOKIA 6120c, NOKIA 5700, NOKIA 6300, NOKIA 6630, and many otherzzz..
Download Nemesis Service Suite (NSS103812.exe) from the site mentioned below:
12.27 MB 2007-08-26 NSS103812.exe
http://www.b-phreaks.co.uk/NSSDownloadLanding.htm
CONNECT UR FONE VIA USB CABLE IN PC MODE & INSTALL THE DRIVERS FOR UR CELL FONE PROVIDED WITH NOKIA PC SUITE.THEN EXIT PC SUITE
THEN INSTALL
Nemesis Service Suite
downloaded from the above site
SELECT USB VIRTUAL DRIVE during installation (in case of nokia 6120cfor nokia 5700 use diamond protection)
AFTER INSTALLATION OPEN IT
THEN CLicK ON SCAN BUTTON
AFTER THAT CLicK ON PHONE INFO
NOW CLicK ON SCAN
NOW CLicK ON PERMANENT MEMORY TAB given on right bottom of application
NOW CLicK ON READ
IT WILL READ THE PERMANENT MEMORY FILE
& WRITE IT TO THE DISK
UR PM FILE WILL BE LOCATED IN THE PATH:
D:\Program Files\NSS\Backup\pm\356252*********.pm
open that PM file in NOTEPAD
now scroll uptil FIELD [308] and on the 5th RECORD ur security code is saved
like that
5=31303038350000000000 remove all the "3" digits and it will be like that
5= 10085 0000000000 now its 10085 thats it.UR LOCK CODE IS 10085
METHOD 2 TO RESET THE CODE
You need a Data cable that comes with your phone and Nemesis Service Suite(later named as NSS) installed on your PC..
Connect normally turned on phone to the cable and install drivers for it,is asked.
Start NSS and click on magnifier glass - marked with mouse cursor.
When driver and other NSS software informations are displayed,click on big Phone Info (1.) button and then on little Scan (2.) button.If everything is OK you will get message Done! (field marked with arrow).
Now click on big Tools (3.) button,
then on tab Factory Settings (4.)
now here,if you have a Symbian phone then you must check Symbian box (it is above the Reset button marked with 6.),if you have S40 3rd phone then leave Symbian unchecked.
Select User code (5.) if not allready selected and click on Reset (6.) button.
If everything goes well message Done will appear again in that field marked in second picture+those messages in regular information window.
That's it,your Security code is set to factory 12345 again.
I tested it on my N79 and it works.
METHOD 1 " TO RECOVER THE CODE
THIS WILL WORK FOR ALL THE NOKIA BB5 HANDSETS like NOKIA 6120c, NOKIA 5700, NOKIA 6300, NOKIA 6630, and many otherzzz..
Download Nemesis Service Suite (NSS103812.exe) from the site mentioned below:
12.27 MB 2007-08-26 NSS103812.exe
http://www.b-phreaks.co.uk/NSSDownloadLanding.htm
CONNECT UR FONE VIA USB CABLE IN PC MODE & INSTALL THE DRIVERS FOR UR CELL FONE PROVIDED WITH NOKIA PC SUITE.THEN EXIT PC SUITE
THEN INSTALL
Nemesis Service Suite
downloaded from the above site
SELECT USB VIRTUAL DRIVE during installation (in case of nokia 6120cfor nokia 5700 use diamond protection)
AFTER INSTALLATION OPEN IT
THEN CLicK ON SCAN BUTTON
AFTER THAT CLicK ON PHONE INFO
NOW CLicK ON SCAN
NOW CLicK ON PERMANENT MEMORY TAB given on right bottom of application
NOW CLicK ON READ
IT WILL READ THE PERMANENT MEMORY FILE
& WRITE IT TO THE DISK
UR PM FILE WILL BE LOCATED IN THE PATH:
D:\Program Files\NSS\Backup\pm\356252*********.pm
open that PM file in NOTEPAD
now scroll uptil FIELD [308] and on the 5th RECORD ur security code is saved
like that
5=31303038350000000000 remove all the "3" digits and it will be like that
5= 10085 0000000000 now its 10085 thats it.UR LOCK CODE IS 10085
METHOD 2 TO RESET THE CODE
You need a Data cable that comes with your phone and Nemesis Service Suite(later named as NSS) installed on your PC..
Connect normally turned on phone to the cable and install drivers for it,is asked.
Start NSS and click on magnifier glass - marked with mouse cursor.
When driver and other NSS software informations are displayed,click on big Phone Info (1.) button and then on little Scan (2.) button.If everything is OK you will get message Done! (field marked with arrow).
Now click on big Tools (3.) button,
then on tab Factory Settings (4.)
now here,if you have a Symbian phone then you must check Symbian box (it is above the Reset button marked with 6.),if you have S40 3rd phone then leave Symbian unchecked.
Select User code (5.) if not allready selected and click on Reset (6.) button.
If everything goes well message Done will appear again in that field marked in second picture+those messages in regular information window.
That's it,your Security code is set to factory 12345 again.
I tested it on my N79 and it works.
Posts
0 Responses to "How to recover lost security code on bb5 phones"
Post a Comment