Nokia Symbian 3rd edition Tricks & downloads

I HAVE FOUND IT SOMEWHERE ELSE NOT DISCOVERED IT BUT DO NOT REMEMBER WHERE I HAD SEEN IT.... ALL CREDITS TO ORIGINAL UPLOADER

METHOD 1 " TO RECOVER THE CODE

THIS WILL WORK FOR ALL THE NOKIA BB5 HANDSETS like NOKIA 6120c, NOKIA 5700, NOKIA 6300, NOKIA 6630, and many otherzzz..

Download Nemesis Service Suite (NSS103812.exe) from the site mentioned below:
12.27 MB 2007-08-26 NSS103812.exe
http://www.b-phreaks.co.uk/NSSDownloadLanding.htm



CONNECT UR FONE VIA USB CABLE IN PC MODE & INSTALL THE DRIVERS FOR UR CELL FONE PROVIDED WITH NOKIA PC SUITE.THEN EXIT PC SUITE

THEN INSTALL

Nemesis Service Suite

downloaded from the above site


SELECT USB VIRTUAL DRIVE during installation (in case of nokia 6120cfor nokia 5700 use diamond protection)



AFTER INSTALLATION OPEN IT


THEN CLicK ON SCAN BUTTON

AFTER THAT CLicK ON PHONE INFO

NOW CLicK ON SCAN

NOW CLicK ON PERMANENT MEMORY TAB given on right bottom of application

NOW CLicK ON READ

IT WILL READ THE PERMANENT MEMORY FILE

& WRITE IT TO THE DISK

UR PM FILE WILL BE LOCATED IN THE PATH:

D:\Program Files\NSS\Backup\pm\356252*********.pm


open that PM file in NOTEPAD


now scroll uptil FIELD [308] and on the 5th RECORD ur security code is saved

like that

5=31303038350000000000 remove all the "3" digits and it will be like that

5= 10085 0000000000 now its 10085 thats it.UR LOCK CODE IS 10085

METHOD 2 TO RESET THE CODE


You need a Data cable that comes with your phone and Nemesis Service Suite(later named as NSS) installed on your PC..

Connect normally turned on phone to the cable and install drivers for it,is asked.
Start NSS and click on magnifier glass - marked with mouse cursor.


When driver and other NSS software informations are displayed,click on big Phone Info (1.) button and then on little Scan (2.) button.If everything is OK you will get message Done! (field marked with arrow).


Now click on big Tools (3.) button,


then on tab Factory Settings (4.)



now here,if you have a Symbian phone then you must check Symbian box (it is above the Reset button marked with 6.),if you have S40 3rd phone then leave Symbian unchecked.
Select User code (5.) if not allready selected and click on Reset (6.) button.
If everything goes well message Done will appear again in that field marked in second picture+those messages in regular information window.



That's it,your Security code is set to factory 12345 again.

I tested it on my N79 and it works.

Some of latest Nokia's firmwares are designed to prevent user from hacking (opening platform security) their phone. The changes seemed to have successfully interfere with HelloOx operation, thus rendering our device unhackable.

I've just found out this new method from neighborhood forum and some folks have already confirmed this hack works on following devices:

Nokia N79 v30.011.051.1
Nokia 6220c v5.15
Nokia E75 v110.48.125
Nokia N97 v11.0.021.209.04* (tnx to leetut & takt29)
Nokia E71 v300.21.012 (tnx to frastgr)
Nokia N78 v30.011 (tnx to andre128)
Nokia 5730XM v100.48.122 (tnx to Vampiro1306)
Nokia N85 v30.19
Nokia N86 v11.043 (tnx to deryl)
Nokia N97 V11.0.021.C01.01 (tnx to leogoto)
Nokia 5800XM V30.0.011 (tnx to leug78)
Nokia E66 v300.21.012 (tnx to oen)

While some others ARE reported unhackable by this method

Confirmed doesn't work with:
Nokia N96 v30 (Thanks to ugur35) (use this instead (tnx to navijic).
Nokia E51 v400.34.011 (tnx to Mr. Angel)
Nokia 5630XM v11.020 (tnx to n8gr)
Nokia E63 V30.0.01(tnx to timon120)
Samsung i8910 HD vXXIG2 (tnx to rolan8910Hd)

KNOWN ISSUES:
Several users have reported that they were unable to install any application after the hack applied. the solution is to disable SWIPOLICYPATH patch in ROMPatcher. (tnx to andre128)

On Nokia N97 v11.0.021.209.04, Rompatcher patches c2z and SwitchOFFRestart cannot be enabled (tnx to takt29)
Open4all patch should be turned off before playing N-Gage games. (tnx to Vampiro1306)
IMPORTANT: FP1 devices have different version of installserver.exe and swipolicy.ini, use this instead, don't use the files in hack.zip. (tnx to Wildsau)
ROMPatcher autostart doesn't work? use this version of ROMpatcher instead, but to have it installed you have to sign it with 20-capabilities certificate or hack your phone first.

The lists above are generated from member feedbacks, should you found any wrong informations, please reply to this thread or pm me.

FOLLOW THE INSTRUCTION EXACTLY AS IT WAS WRITTEN

USE ONLY THE ATTACHED FILES, THE ATTACHED FILES ARE ALREADY SPECIFICALLY MODIFIED TO COMPLY WITH THE FOLLOWING HACKING STEPS

What you'll need to provide yourself:

Certificate with 17 capabilities (like OPDA's one)
Signer to sign the sisx file
Decent 3rd party filemanager
Install your favourite file manager; X-plore & Y-Browser are recommended (skip this step if you already have it installed).
Sign & Install Mapdrives
Sign & Install ROMPatcher
Sign & Install Y_browser or X-plore
Run Mapdrives (Mapdrives will map drive A:\ to c:\sys\bin with rw access!)
Uninstall Mapdrives
Put files under "Copy_to_A" folder to A:\
Restart your device
Open ROMPatcher, apply open4all.rmp, ChangeSWIpolicyPath.rmp* & Installserver_FP2.rmp
HACKED (if you're lucky enough, sorry if you aren't

HERE I ATTACHED ALL SISX FILES .......

DOWNLOAD

What is HelloOX2?

HelloOX2 is an One step Hacking tool for all Symbian S60 3rd & 5th phone.
Hacking mean that it can get full access to your phone's system folders and files, with this capability, HelloOX2 could install a root certificate to your phone, and with the root cer & key pair you could sign any apps to install, include the Manufacturer capabilities requested apps. Completely fix annoying certificate error!

v2.03 update
- new feature UnHack! just run HelloOX2 again after Hack, it'll prompt a menu let you choose
UnHack or Hack again. (don't use this function after update to UnHackable firmware)
- include RomPatcher+ update to v2.2 (by Il.Socio)
- Modo removed, because open4all working on all phones, we don't need it now
- compatibility fix for 5700, 6110, 6120, E61, E61i, E65

DOWNLOAD

RomPatcher+ is an improved and fixed version of the RomPatcher software developed by Tejas Using RomPatcher+ it is possibile to reach a new level of customization for you Symbian phone.


Change-Log v2.1 > v2.2:
+ New: it is now possible to search / filter the patches in the list. Just start typing the patch name to apply the filter.
+ New: the wildcard "??" is now available for patch-makers.
eg. SnR:sys\bin\installserver.exe:0011????02233043:002 8??E00B20C043
(NOTE: 3rd byte will be kept unchanged)
+ Improved: changed installer to place Open4All_RP+ patch in the proper drive.
+ Fixed: in the SnR command, only the first instance was patched successfully. Wasn't possible to patch further instances of the same byte pattern.
+ Fixed: memory corruption when the patch contains 2 or more changes to a RAM memory address (not in the ROM range) and the "apply patch" fails.
+ Fixed: red-icon is shown like in RP by ZoRN, ie. if the patch doesn't perform any change to the memory the red-icon will be shown (eg. when a patch contains only comments or unmatched SnR lines)


Tip for patch-makers
If your patch uses some features of RP+ v2.2 and above (like ?? wildcard) I suggest you to include in your patch a check, like the one here below:


DOWNLOAD HERE

Skin modded with colorful icon (Rep,heart)


N-Gage Patch UnPatch With Themes 1.40 (1557) By Tejas Patel

Download

N-Gage_Installer_v.1.40.1557_Repacked_=Tejas=_

Download


IF U LIKE THIS....
THAN PLEASE GIVE COMMENTS

Thanks to the people providing me with the 10282EDC.txt file from their phones, I have been able to Mod the files for each phone to work with it's Specific Megapixel Quality and Settings, so that it won't crash or stop the camera from working by using an incorrect one, and so it will not mess up the quality.


Downloads:

Symbian 5th Edition Camera Mods
8MP | For i8910 HD Only
i8910 HD:http://www.box.net/shared/34unppe7sx

5MP | N97 / N97 Mini / X6
Nseries:http://www.box.net/shared/u0u6ej1jzk

3.2MP | 5800 XM
Nseries:http://www.box.net/shared/e8d59j3onv


Symbian 3rd FP2 Edition Camera Mods
8MP | N86 8MP
Nseries:http://www.box.net/shared/7ql4uil8r2

5MP | 6220 Classic / N85 / N79 / All Other
Nseries: http://www.box.net/shared/68hebdz11p

5MP | For N96 Only
N96:http://www.box.net/shared/ml99fufiv0

3.2MP | N78 / 5630 XM / E66 / E52 / All Other
Nseries:http://www.box.net/shared/jfhuxfy2kr
Eseries:http://www.box.net/shared/uq27plgnph

2MP | 5320 XM / E63 / All Other
Nseries:http://www.box.net/shared/hi6cutfp1r


Symbian 3rd Edition FP1 Camera Mods
5MP | N95 / N95 8GB / N82 / All Other
Nseries:http://www.box.net/shared/68hebdz11p

3.2MP | E71
Eseries:http://www.box.net/shared/uq27plgnph

2MP | N81 / All Other
Nseries:http://www.box.net/shared/hi6cutfp1r

Read Before You Do Anything:

WARNING: Using the wrong file may cause your Camera to not Open, Mess up the Quality and/or force you to Hard Reset your phone.[/size]
1] No, The file doesn't have to exist in the Z:Drive for this to work, on ANY phone - And you also can NOT write to the Z:Drive.
2] Yes, this will increase the File Size of your Photos, some of mine range from 600KB to around 2MB, but the quality is worth it.
3] Yes, You can remove this Mod by simply deleting the File where you pasted it.
4] No, the size of the Picture doesn't matter. You may find that taking a picture of distant scenery ends up being of Lower File Size, this does not mean the quality is any worse; you will see a difference depending on the Colors in the Photo, Close Up Detail or the amount of things happening in the photo.
5] You will see the Quality this Mod provides when you Zoom into your photos AFTER taking them.
6] Try looking at your Photos on your PC/Mac, you can see the difference better this way.
7] No, you do not need the C2Z Patch for this to work.

Hacking:
I recommend using this method to hack, it costs a small fee; http://helloox2.com/. If you seek a free way to Hack your phone, look on Symbian Freak else where - this topic is not to help hacking phones.


Instructions:
Phone Must Be Hacked

1] Download the Corosponding file for your phone to your PC/Mac/Phone.
2] Turn off Caps via any method (Open4All Patch/RomPatcher's Disable Caps/Caps Off etc).
3] Open X-Plore or Y-Browser (Or any File Manager you prefer)
4] Copy/Move 10282EDC.txt
5] Go to C:/Private and paste 10282EDC.txt into Folder 10202be9.
6] Exit X-Plore/Y-Browser (Or Whatever you are Using)
7] Reboot Phone (or Switch off then on)
8] Check C:/Private/10202be9 to see if 10282EDC.txt is still there.

Troubleshooting:

File Keeps Deleting Itself When I Reboot, How Can I Fix This?
Method 1] If the file keeps deleting itself, using X-Plore, mark it as Read-Only and System File (Just highlight the file, press Menu, go fo File then Attributes and you can change the settings)
Method 2] If you are still finding that the file is Deleting itself after you reboot, switch caps on before you reboot, otherwise it gets deleted.

I See No Difference?
1] If you are using the N82 or the N96, you will see little difference because of the default settings for the camera are already quite High.
On the N96, you are only gaining a 5% Improvement in Quality.
People have reported difference in quality with the N82, and I have also, firsthand, seen the difference in quality.
2] You will see the Quality this Mod provides when you Zoom into your photos After taking them

This app is designed to let you make your own c2z patch on your phone and no need to use PC.
It's easy to use, select Options - Generate,and wait for a monent.
The c2z patch is generated in E:\c2z.rmp. Cut it and paste it to E:\patches,open Rompatcher-- apply.

Tested and working on N85 V30

P.S you need to install P.I.P.S. libraries first

Credits to Tejas Patel


Download


For ARM
version use 1.1a

For THUMB version use 1.1t

C2ZMaker-v1.1a.sisx.zip

C2ZMaker-v1.1t.sisx.zip