Nokia Symbian 3rd edition Tricks & downloads

A user of this forum, 911sniper, provided us with an HTC test-only ROM:
http://forum.xda-developers.com/show...&postcount=735

Alternate download link:
http://www.neufgiga.com/n/50-17/shar...492127a54134b/

Alternate download link:
http://www.4shared.com/file/82315205/ea440324/RUU.html


IMPORTANT: Read the steps below before flashing!!!!

------------------------------------------------------------------------------------------------



This is a ROM that can potentially overwrite and/or unbrick a device with an original (non-patched) SPL. It has a wildcard for Model ID (ELF0*****) and CID (11111111).

I don't have a bricked Elf but I tested it with an original CID-locked SPL and it overwrote it and flashed a new generic HTC ROM with the following:

* IPL 2.11.1002
* SPL 2.11.1000 MFG
* ROM version: 2.11.0. WWE
* ROM date: 08/14/07
* Radio: 02.98.90
* CE OS 5.2.1620 (Build 18125.0.4.2)



Here are the steps to make it work:
Quote:

1. Download this ROM from the link above
2. Two ways to flash:
* Rename the file to ELF0IMG.nbh if you want to flash from SD card (you must format the card to FAT32 first)
* Put the ROM in a RUU folder that contains the RomUpdateUtility.exe. You must remove any other .NBH files in that folder first.
3. Start your bricked Elf in bootloader mode (hold down camera button and reset). If you are using the SD card, it should flash right away.
4. NOTE: If the device flashed successfully but is now stuck at the new boot screen, you are still ok. Now you can flash ANY shipped ROM at the bootloader (if you have an Elfin, flash only an Elfin shipped ROM) and your device will be running again. If you can't flash a shipped ROM after successfully flashing the Unbricker ROM, then make a Gold Card and follow the steps in that thread.
5. NOTE: If the Unbricker ROM doesn't work then make a Gold Card and use it again on that card.


NOTE:
One thing I noticed is that you cannot use the white screen method (elf-uspl.exe) after you flash this ROM. If you try that, then the message "Not in use" pops up under the penguin. However, you can flash ANY shipped ROM from bootloader after this unbricker ROM has been flashed. From there, you can do white screen method and then flash the Hard-SPL/USPL/cooked ROM.