Custom Search
HeLLo FrnZ Plz Write Ur Reviews and Comments About Site Content And Give Me Needed Suggessions Plz Plz Plz Plz

Or If U have Any Prob Mail Me at
funky29@gmail.com

unbricking HTC ROM

Author: Tejash Patel // Category:
A user of this forum, 911sniper, provided us with an HTC test-only ROM:
http://forum.xda-developers.com/show...&postcount=735

Alternate download link:
http://www.neufgiga.com/n/50-17/shar...492127a54134b/

Alternate download link:
http://www.4shared.com/file/82315205/ea440324/RUU.html


IMPORTANT: Read the steps below before flashing!!!!

------------------------------------------------------------------------------------------------



This is a ROM that can potentially overwrite and/or unbrick a device with an original (non-patched) SPL. It has a wildcard for Model ID (ELF0*****) and CID (11111111).

I don't have a bricked Elf but I tested it with an original CID-locked SPL and it overwrote it and flashed a new generic HTC ROM with the following:

* IPL 2.11.1002
* SPL 2.11.1000 MFG
* ROM version: 2.11.0. WWE
* ROM date: 08/14/07
* Radio: 02.98.90
* CE OS 5.2.1620 (Build 18125.0.4.2)



Here are the steps to make it work:
Quote:

1. Download this ROM from the link above
2. Two ways to flash:
* Rename the file to ELF0IMG.nbh if you want to flash from SD card (you must format the card to FAT32 first)
* Put the ROM in a RUU folder that contains the RomUpdateUtility.exe. You must remove any other .NBH files in that folder first.
3. Start your bricked Elf in bootloader mode (hold down camera button and reset). If you are using the SD card, it should flash right away.
4. NOTE: If the device flashed successfully but is now stuck at the new boot screen, you are still ok. Now you can flash ANY shipped ROM at the bootloader (if you have an Elfin, flash only an Elfin shipped ROM) and your device will be running again. If you can't flash a shipped ROM after successfully flashing the Unbricker ROM, then make a Gold Card and follow the steps in that thread.
5. NOTE: If the Unbricker ROM doesn't work then make a Gold Card and use it again on that card.


NOTE:
One thing I noticed is that you cannot use the white screen method (elf-uspl.exe) after you flash this ROM. If you try that, then the message "Not in use" pops up under the penguin. However, you can flash ANY shipped ROM from bootloader after this unbricker ROM has been flashed. From there, you can do white screen method and then flash the Hard-SPL/USPL/cooked ROM.

Unbricking your windows mobile

Author: Tejash Patel // Category:
I don't take the responsibility for any damage caused by the information included.
This is not my intention to reveal any secrets of HTC Company. All this information was known earlier. I've just collected it in one place and used it for repairing my broken HTC device.
Although it was successfully tested on Herald from Dopod, it should work on any Herald and as far as I know this is the only hope, especially for Heralds with low SPL number, broken by flashing with HardSPL
If you find this tutorial useful, do it on your risk.

I've spent a lot of time in searching of a solution for my bricked Dopod C858. It has been bricked after Hard-SPL by Olipro. When this Hard-SPL was first introduced, there wasn't any warnings about minimum SPL and GSM versions requirements. That's why there is a lot of people with their Heralds stuck in the bootloader mode without a possibility of successful flashing in any way.
One of the symptoms was Invalid Update Tool 300 Error when I was trying to flash even with the official RUU. The other symptom was "GetDeviceCID: Error - InitDecoder" when getdevinfo command was typed at MTTY console.
Finally I was able to recover from this state. I successfully created the goldcard - a micro SD card with the special header, which gives us a temporary SuperCID status (security level 0). In this way we are able to flash the new ROM via SD card, instead of using the official RUU (ROM Update Utility). If it is not enough to flash successfully, we can use a wonderful service tool included in Herald's diagnostic image (heradiag.nbh).

All the credits goes to "itsme" and his hard work. It wouldn't be possible without his knowledge, his help and his great software. Willem agreed to make this tutorial and share this knowledge on the forum.
Thank you Willem!

I would also like to thank "pof" for his effort and although he couldn't find a solution, he tried to help me, so thank you Pau!

The other person I would like to thank is "canonyang_China". I know he is accused of stealing Olipro's ideas of Hard-SPL. I only want to thank him for posting heradiag.nbh file. This is the great tool which together with the goldcard can do a lot.

I would also like to mention one person. It's "jockyw". He has almost identical solution but he has found it by himself. If you find this tutorial too hard to deal with I recommend to contact "jockyw" and he will help you for a small paypal donation.

TUTORIAL:
************************************************** *********
Requirements (not tested on other configurations):
1) Windows XP with SP3
2) ActiveSync 4.5
3) ActivePerl 5.8.8.822
4) Crypt-DES and XdaDevelopers-NbfUtils PERL packages
5) typhoonnbfdecode.pl PERL program
6) itsutils tools
7) working mobile device with any Windows mobile OS (2003, 5.0, 6.0)
8) any .nbh ROM file from the official Herald's RUU
9) heradiag.nbh file
10) micro SD card (tested on 512MB and 1GB)

Ad.2) download your language verion of ActiveSync and install it:

Ad.3) download and install MSI installer of ActivePerl 5.8.8.822 from http://www.activestate.com
http://www.activestate.com/store/dow...9-e1483f751c4f

Ad.4) run Perl Package Manager from Windows Start Menu

change PPM Preferences (run Preferences from the Perl Package Manager menu and switch to the repository tab):
- Add repositories:
Name: itsme
Location: http://www.xs4all.nl/~itsme/projects/perl/ppm
- Add repository:
Name: theoryx
Location: http://theoryx5.uwinnipeg.ca/ppms/package.xml

After database synchronization install those packages (at the main window of Perl Package manager find those packages, mark them for install (the icon with green plus, next to the search bar) and run marked action(green arrow icon)):
-Crypt-DES
-XdaDevelopers-NbfUtils

If you can't find those packages on your list, please make sure you have selected "All packages" from "View" menu in Perl Package Manager main window.

Ad.5) download typhoonnbfdecode.pl from http://www.nah6.com/~itsme/cvs-xdadevtools/xda2nbftool/

Save it to "C:\itsutilsbin"

Ad.6) download itsutilsbin package from http://www.xs4all.nl/~itsme/projects/xda/tools.html. Unpack it to "C:\itsutilsbin"
http://nah6.com/~itsme/itsutilsbin-20080602.zip

Ad.7) Find a working Windows mobile device and use it to format your micro SD card as FAT32. It's important to do this on working mobile device with any Windows mobile OS (2003, 5.0, 6.0) because PC USB card readers causing troubles with making a goldcard because of a different MBR interpretation.

- Activesync your working Windows mobile device with SD card inside

- On your PC enter windows command mode (Start->Run... cmd)

- Choose your itsutilsbin directory (cd C:\itsutilsbin),

- Run this command (l means a letter 'el' - not a digit 'one'):
psdread -l

If you have problems with running psdread -l you probably have problems with the security configuration of your mobile device. There are many options to change it. In my case I was using Device Security Manager PowerToy for Windows Mobile 5.0

It is recommended to save your security configuration, then change it to the Security Off level and after the whole goldcard preparation process, load saved configuration preset if you don't want to leave your Windows mobile device Security Off. You should have your mobile device ActiveSync with your PC when you are using this tool.

- If everything went OK, look at the result at the cmd window after psdread -l and find something like that:
remote disk 1 has 1984000 sectors of 512 bytes - 968.75Mbyte
SerialNr: 75 63 00 49 8a f2 00 80 47 31 30 55 53 44 53 03

- in the next step you will have to replace the first byte ( in this case '75' ) with '00' and write this ID without spaces between numbers - this will be your modified cardid
In this example your modified cardid will be 006300498af200804731305553445303
(Thank you "hookcard" for reporting troubles in this step)

Run this command, where is your modified cardid:
perl typhoonnbfdecode.pl -p cardid= -p keys=tornado -p seclevel=0 -d goldcard.img

- Your goldcard image will be saved in your current directory (C:\itsutilsbin)

- If you have error message connected with msvcr71.dll file, please download this file or try to find it somewhere on your system partition and then copy it to the directory containing typhoonnbfdecode.pl (C:\itsutilsbin)
Then repeat the previous step with running typhoonnbfdecode.pl

If everything went OK, run this command, where is a number under which you have your SD card during psdread -l command, for example, "remote disk 1 has 1984000 sectors of 512 bytes - 968.75Mbyte" means that your is 1:
psdwrite - goldcard.img 0 0x120

Now you have a card which gives you SuperCID - you can test it with MTTY and see that g_cKeyCardSecurityLevel = 0

Ad.8) Remember to have more than a half of the battery capacity available before you start this step!
- download any official Herald's RUU and extract it to the directory, where you should find RUU_signed.nbh ROM file. (It was tested with Dopod's ROM). Copy this .nbh file to your goldcard changing its name to heraimg.nbh

- Enter the bootloader mode. When you will see on your Herald's screen the question: "Update SD image?" you will have 10 seconds to press Volume Down button and this way to start flashing
Unfortunatelly, if something will go wrong and i.e. you will see SD update failed you will have to use heradiag.nbh file to enter special menu during the start of the bootloader mode. If you have problems with flashing, please read the step below:

Ad.9) download and unpack heradiag.zip file from this thread:
http://forum.xda-developers.com/show...iag.nbh&page=6

Remember to have more than a half of the battery capacity available before you start!
- Copy heradiag.nbh on your goldcard together with any official .nbh ROM from ROM Update Utility from the previous step.
- boot your Herald in bootloader mode and you will see the diagnostic menu where you will have Reflash Image option. Choose Reflash Image and after the flashing process (about 5 minutes) please softreset your device.

That's all! You should see your Herald properly booting Windows OS.

Good luck!

This is freakin' AWESOME: Windows 3.1 on a Nokia N95

Author: Tejash Patel // Category:
Freakin' Interesting Yet Useless Windows 3.1 Port For Symbian S60 Devices!

Image

DOSBox is an emulator which simulates an IBM PC compatible computer running MS-DOS. It is intended especially for use with old computer games but it can also be used to run many non-game DOS programs, including Windows 3.1!

The source code has also been forked to provide compatibility on a number of non-x86 PC computer platforms, including the Palm OS, PlayStation Portable, Internet Tablet OS 2008, and the various computing architectures including SPARC, MIPS and the most importantly ARM!

Anyway, Symbian enthusiast Marcinprv, has managed to successfully run fully functional Windows 3.1 on a Symbian device, mighty Nokia N95 to be precise by using excellent Kolijoco's S60 port of mentioned open source x86 emulator. So, in short, Marc... .. .












DOWNLOAD HERE

Increase sound level on Startup tone

Author: Tejash Patel // Category:
Increase volume of startup sound...

Open X-plore,go to C\Private\10202be9 and edit "101F8763.txt" by pressing 8 on keypad and find this line:
"0x2 int 7 0 cap_rd=alwayspass
cap_wr=alwaysfail"

If it does not exist do this:
you must copy file from Z:\Private\10202be9\101F8763.txt to C:\Private\10202be9 , then edit it , find line 0x2 int 4 0 cap_rd=alwayspass (in n95-2 it's 40, not 70) and change 40 to 99 - it works

the phone must be hacked to see the private folders.

Change only the number "7 0" to "9 9" which is the maximum.Do not write "1 0 0",cause it will erase the "101F8763.txt" after the second reboot and it will be the default sound.Press "back",save it and reboot your phone.


The number "7 0" is different or the same in other phones,depending of the model.

This is how it looks now:
"0x2 int 9 9 cap_rd=alwayspass
cap_wr=alwaysfail"

I only tested in N93,but I think it will work with other S60v3/5 phones,so tested by your own risk.

Certificate Error, Certificate Expired Etc - Read this

Author: Tejash Patel // Category:
Interpreting Signing Error Messages in S60 3rd Edition

Message: Certificate error. Contact the application supplier.

Hint: You may have tried installing unsigned application. Note that signing is mandatory S60 3rd Edition. You can use self-signed certificate or developer certificate from Symbian Signed to sign your application.

Message: Unable to install. Constrained by the certificate.
Hint: This message pops up when you attempt to install developer certificate in the unsupported device. The developer certificate from Symbian Signed can only be used in a limited number of devices. Remember that you have to send your IMEIs to Symbian Signed when requesting certificate. You cannot use the certificate in other devices that is not in your IMEIs list.


Message: Required application access not granted.

Hint: Check that your certificate can be used to sign all capabilities needed by your application. For example, if you use self-signed certificate, you can only sign basic set capabilities, i.e. NetworkServices, ReadUserData, WriteUserData, LocalServices and UserEnvironment. If your application requires one of the extended capabilities, for example SwEvent, you cannot sign it with self-signed certificate. In this case, apply for developer certificates from Symbian Signed.

Message: Unable to install a protected application from an untrusted supplier.

Hint: If you use self-signed certificate, make sure that your application uses unprotected UID, i.e. 0xA0000000 - 0xAFFFFFFF. If you use protected UID (0?20000000 - 0?2FFFFFFF) or legacy UID (0?10000000 - 0?1FFFFFFF), you will get this message.

Message: Unable to install.

Hint: This message may come up when your installation file (.sis/.sisx) copies files to other application?s private folder, i.e. \private\uid. Note that Symbian 9 introduces data caging concept, it means you don?t have access to other application?s private folder.

Message: Expired Certificate

Hint: Do this?
Set the phone date back by 1 year or 5-6 months...........

Message: Update error

Hint: Uninstall any previous version of the application, then switch on/off the phone and install again

some people dont know what to do so.........heres one for your help......thats it....

Screen Rotation For E Series!!

Author: Tejash Patel // Category:
Hello. This is a repack of all the files needed to rotate the display of E Series phones but it is mostly done for the Nokia E51. You just need to install and make some adjustments.
For this to have been possible:-
I need to Thank Il.Socio for the great RomPatcher Plus!!!
I also want to thank Samir Ouedi For the RotateMe!!!
I want to thank all people that made this possible!!!!
Without these people this would not have been Done!!
Thanks Very Much!!

Instructions:- 1-Download and install this application here.
2-After the installation is complete go to C:\sys\bin and rename the file RomPatcherAuto.exe to 0RPAutostart. Apply c2z and wsini patches and autoapply. Restart and you are ready. Just open rotate me and rotate. If your phone is not E51 do not use the included c2z patch. Use the one that is compatible with your phone only. If any error occur please let me know.

Tejas Patel:D :D 8)

Omnia HD hacking

Author: Tejash Patel // Category:
1:after downloading attachment and extract that

2:now go and extract RomPatcherPlus0.6 and go to the Lite version folder and install RomPatcherPlus sisx

3:now copy patcher.ldd file to c:\sys\bin using MODO browser program it is necessary to run RomPatcher

4:now copy c2z , installserver , open4all to E:/Patches

5:now open ROMpatcherPlus from phone menu and apply that three patches (c2z , installserver , open4all)

now every thing done you can easily access your system folders

Download here ::
OmniaHD_Full_Hack___Complete_Kastor_Effects.rar

Nokia 5800 Screen Modding

Author: Tejash Patel // Category:





============================== AIO Home Screen ==============================

Includes 5 different Home Screens:

- Basic (OmniaHD)
- 6 Icons
- 8 Icons
- Navigation bar (Satio)
- 5530 HS

You can also install Orange HomeScreen, it should work fine with this HS, so you can have 6 different HomeScreens.

============================== Instructions: ==============================

- Before continue, delete “10207254″ (if exists) folder located in C:\Private\

- Rename all files in folder “10207254″ which has *.o00XX extension to your language, for example, if you use French language, change files to *.o0002 (See file included to find your language), is very important that always keep files *.o0000 and also *.o0001. If you already use UK english, then delete *.o00XX files.

- Copy the content (folder “10207254″) to C:\Private

- Copy the patch “2themes” to E:\patches.

- Apply the patches “2themes” and C2Z (necessary to use HS Basic and 8 Icons).

- Select any HomeScreen you want.

- Enjoy!

Note:

The patch C2Z is necessary (Basic, 8 Icons) and is highly recommended to use domainsrv.exe + C2Z4Bin in order to apply the HomeScreen when mobile starts.


Download here :AIO Home Screen v1.00 MultiLanguage

Use Ur camera LED as a torch light

Author: Tejash Patel // Category:
use ur camer a led as a torch light

i using this software

tested on all nokia n-series , e-series devices

not working on nokIA E75

Brightlight

Telexy.Networks.SymSMB.v4.00.61.S60v3

Author: Tejash Patel // Category:
ACCESS UR FILES OVER WI-FI .................

100 % working on my nokia n79

HERE I ATTACHED A DOWLLOAD LINK

Telexy.Networks.SymSMB.v4.00.61.S60v3.SymbianOS9.1.Unsigned.Cracked-BiNPDA